金龙先生15916816001
邮 箱:1362174071@qq.com
洽谈Q Q:1362174071
Makrolon 1260
MVR (300 °C/1.2 kg) 34 cm3/10 min; impact modified; low viscosity; easy release
Makrolon 1804
MVR (300 °C/1.2 kg) 6.0 cm3/10 min; Extrusion; flame retardant; UL 94V-2/1.5 mm and 3.0 mm; high viscosity; UV stabilized; optimized for low plate-out; solid sheet
Makrolon 1837
MVR (300 °C/1.2 kg) 11 cm3/10 min; impact modified; medium viscosity; easy release
Makrolon 1837 MAS081
MVR (300 °C/1.2 kg) 8.0 cm3/10 min; impact modified; medium viscosity; easy release
Makrolon 1881
MVR (300 °C/1.2 kg) 19 cm3/10 min; impact modified; improved ultrasonic weldability; low viscosity; UV stabilized; easy release
Makrolon 1899
MVR (300 °C/1.2 kg) 16 cm3/10 min; special flame retardent system; UL 94V-0/0.75 mm; impact modified; medium viscosity; easy release; vicat softening temperature 50 N; 50 °C/h = 110 °C; battery housing
Makrolon 1952
MVR (300 °C/1.2 kg) 10 cm3/10 min; flame retardant; UL 94V-0/2.3 mm; medium viscosity; UV stabilized; easy release; LCD notebook cover
Makrolon 1954
MVR (300 °C/1.2 kg) 18 cm3/10 min; low viscosity; UV stabilized; improved friction characteristics; housings- and operating parts; sliding elements
Makrolon 2205
MVR (300 °C/1.2 kg) 34 cm3/10 min; general purpose; low viscosity; easy release
Makrolon 2207
MVR (300 °C/1.2 kg) 35 cm3/10 min; general purpose; low viscosity; UV stabilized; easy release
Makrolon 2256
MVR (300 °C/1.2 kg) 34 cm3/10 min; food contact quality; low viscosity; easy release
Makrolon 2258
MVR (300 °C/1.2 kg) 34 cm3/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; low viscosity; easy release
Makrolon 2400
MVR (300 °C/1.2 kg) 19 cm3/10 min; general purpose; low viscosity
Makrolon 2405
MVR (300 °C/1.2 kg) 19 cm3/10 min; general purpose; low viscosity; easy release
Makrolon 2405 MAS048
MVR (300 °C/1.2 kg) 19 cm3/10 min; general purpose; low viscosity; easy release
Makrolon 2405 MAS056
MVR (300 °C/1.2 kg) 19 cm3/10 min; improved impact strength; low viscosity; easy release
Makrolon 2405 MAS057
MVR (300 °C/1.2 kg) 19 cm3/10 min; improved impact strength; low viscosity; easy release
Makrolon 2407
MVR (300 °C/1.2 kg) 19 cm3/10 min; general purpose; low viscosity; UV stabilized; easy release
PC是优良的E(120℃)级绝缘材料,用于制造绝缘接插件、线圈框架、管座、绝缘套管、电话机壳体及零件、矿灯的电池壳等。也可用于制作尺寸精度很高的零件,如光盘、电话、电子计算机、视频录象机、电话交换器、信号继电器等通讯器材。PC薄还被广泛用作电容器、绝缘皮包、录音带、彩色录象磁带等。
PC可注塑、挤出、模压、吹塑、热成型、印刷、粘接、涂覆和机加工,重要的加工方法是注塑。成型之前必须预干燥,水分含量应低于0.02%,微量水份在高温下加工会使制品产生白浊色泽,银丝和气泡,
PC在室温下具有相当大的强迫高弹形变能力。冲击韧性高,因此可进行冷压,冷拉,冷辊压等冷成型加工。挤出用PC分子量应大于3万,要采用渐变压缩型螺杆,长径比1:18~24,压缩比1:2.5,可采用挤出吹塑,注-吹、注-拉-吹法成型高质量,高透明瓶子。