在线电影你懂的,坐公交车居然被弄了2个小时,亚洲一线产区二线产区区别在,国产AV麻豆MAG剧集

東莞市廣豐聯泰塑料有限公司

專供PC+ABS 沙伯基礎PC 德國拜耳PC+ABS 寶理PPS LCP

產品分類
聯系方式
友情鏈接
您當前的位置：首頁 » 新聞中心 » XENOY PC+PBT 5720U 化學抵抗低溫,紫外線穩定.
新聞中心
XENOY PC+PBT 5720U 化學抵抗低溫,紫外線穩定.
發布時間：2016-04-21        瀏覽次數：285        返回列表

XENOY ? Resin 5720U

SI | British | Metric | PDF Europe-Africa-Middle East: COMMERCIAL

 
Unfilled PBT+PC alloy. Outstanding low temperature impact/chemical resistance. UV stabilized version of XENOY
 

Property
 
TYPICAL PROPERTIES (1)
MECHANICAL Value Unit Standard
Tensile Stress, yld, Type I, 50 mm/min 470 kgf/cm2 ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min 480 kgf/cm2 ASTM D 638
Tensile Stress, yld, Type I, 5 mm/min 440 kgf/cm2 ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min 500 kgf/cm2 ASTM D 638
Tensile Stress, yld, Type I, 10 mm/min 450 kgf/cm2 SABIC - Japan Method
Tensile Stress, brk, Type I, 10 mm/min 470 kgf/cm2 SABIC - Japan Method
Tensile Strain, yld, Type I, 50 mm/min 4 % ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min 116.6 % ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min 4.6 % ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min 122.4 % ASTM D 638
Tensile Strain, yld, Type I, 10 mm/min 4.6 % SABIC - Japan Method
Tensile Strain, brk, Type I, 10 mm/min 109.5 % SABIC - Japan Method
Tensile Modulus, 50 mm/min 18500 kgf/cm2 ASTM D 638
Tensile Modulus, 5 mm/min 18600 kgf/cm2 ASTM D 638
Tensile Modulus, 10 mm/min 18700 kgf/cm2 SABIC - Japan Method
Flexural Stress, yld, 1.3 mm/min, 50 mm span 710 kgf/cm2 ASTM D 790
Flexural Stress, brk, 1.3 mm/min, 50 mm span 700 kgf/cm2 ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span 16900 kgf/cm2 ASTM D 790
Tensile Stress, yield, 5 mm/min 44 MPa ISO 527
Tensile Stress, break, 5 mm/min 43 MPa ISO 527
Tensile Stress, yield, 50 mm/min 47 MPa ISO 527
Tensile Stress, break, 50 mm/min 43 MPa ISO 527
Tensile Strain, yield, 5 mm/min 4.1 % ISO 527
Tensile Strain, break, 5 mm/min 106.8 % ISO 527
Tensile Strain, yield, 50 mm/min 4.6 % ISO 527
Tensile Strain, break, 50 mm/min 115.3 % ISO 527
Tensile Modulus, 1 mm/min 1790 MPa ISO 527
Flexural Stress, yield, 2 mm/min 71 MPa ISO 178
Flexural Modulus, 2 mm/min 1860 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact, notched, 23°C 73 cm-kgf/cm ASTM D 256
Izod Impact, notched, 0°C 70 cm-kgf/cm ASTM D 256
Izod Impact, notched, -10°C 67 cm-kgf/cm ASTM D 256
Izod Impact, notched, -20°C 70 cm-kgf/cm ASTM D 256
Izod Impact, notched, -30°C 65 cm-kgf/cm ASTM D 256
Izod Impact, notched, -40°C 60 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak, 23°C 456 cm-kgf ASTM D 3763
Instrumented Impact, Energy @ peak, -20°C 420 cm-kgf ASTM D 3763
Instrumented Impact Energy @ peak, -30 504 cm-kgf ASTM D 3763
Instrumented Impact Energy @ peak, -40°C 504 cm-kgf ASTM D 3763
Instrumented Impact Total Energy, 23°C 550 cm-kgf ASTM D 3763
Instrumented Impact Total Energy, -20°C 542 cm-kgf ASTM D 3763
Instrumented Impact Total Energy, -30°C 631 cm-kgf ASTM D 3763
Instrumented Impact Total Energy, -40°C 603 cm-kgf ASTM D 3763
Izod Impact, notched 80*10*4 +23°C 55 kJ/m2 ISO 180/1A
Izod Impact, notched 80*10*4 0°C 55 kJ/m2 ISO 180/1A
Izod Impact, notched 80*10*4 -10°C 52 kJ/m2 ISO 180/1A
Izod Impact, notched 80*10*4 -20°C 50 kJ/m2 ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 48 kJ/m2 ISO 180/1A
Izod Impact, notched 80*10*4 -40°C 46 kJ/m2 ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 55 kJ/m2 ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 47 kJ/m2 ISO 179/1eA
THERMAL Value Unit Standard
Vicat Softening Temp, Rate B/50 119 °C ASTM D 1525
HDT, 0.45 MPa, 3.2 mm, unannealed 108 °C ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed 83 °C ASTM D 648
HDT, 0.45 MPa, 6.4 mm, unannealed 117 °C ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed 95 °C ASTM D 648
CTE, -40°C to 95°C, flow 9.75E-05 1/°C ASTM E 831
CTE, -40°C to 95°C, xflow 1.E-04 1/°C ASTM E 831
CTE, -30°C to 80°C, flow 9.75E-05 1/°C ISO 11359-2
CTE, -30°C to 80°C, xflow 1.E-04 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 119 °C ISO 306
Vicat Softening Temp, Rate B/120 122 °C ISO 306
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 109 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 87 °C ISO 75/Af
PHYSICAL Value Unit Standard
Specific Gravity 1.17 - ASTM D 792
Specific Volume 0.85 cm3/g ASTM D 792
Density 1.17 g/cm3 ASTM D 792
Mold Shrinkage, flow, 3.2 mm (5) 1 - 1.2 % SABIC Method
Melt Flow Rate, 250°C/2.16 kgf 3.8 g/10 min ASTM D 1238
Melt Flow Rate, 250°C/5.0 kgf 11.4 g/10 min ASTM D 1238
Melt Flow Rate, 265°C/2.16kgf 6 g/10 min ASTM D 1238
Melt Flow Rate, 266°C/5.0 kgf 19.7 g/10 min ASTM D 1238
Density 1.17 g/cm3 ISO 1183
Water Absorption, (23°C/sat) 0.28 % ISO 62
Moisture Absorption (23°C / 50% RH) 0.08 % ISO 62
Melt Flow Rate, 250°C/2.16 kg 3 g/10 min ISO 1133
Melt Flow Rate, 250°C/5.0 kg 11 g/10 min ISO 1133
Melt Volume Rate, MVR at 250°C/2.16 kg 3 cm3/10 min ISO 1133
Melt Volume Rate, MVR at 250°C/5.0 kg 10 cm3/10 min ISO 1133
Melt Volume Rate, MVR at 265°C/2.16 kg 6 cm3/10 min ISO 1133
Melt Volume Rate, MVR at 265°C/5.0 kg 18 cm3/10 min ISO 1133
Source GMD, last updated:2007/07/31
Processing

Parameter
Injection Molding Value Unit
Drying Temperature 110 °C
Drying Time 4 - 6 hrs
Drying Time (Cumulative) 8 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 260 - 275 °C
Nozzle Temperature 255 - 270 °C
Front - Zone 3 Temperature 255 - 275 °C
Middle - Zone 2 Temperature 250 - 270 °C
Rear - Zone 1 Temperature 245 - 265 °C
Mold Temperature 65 - 90 °C
Back Pressure 0.3 - 0.7 MPa
Screw Speed 50 - 80 rpm
Shot to Cylinder Size 50 - 80 %
Vent Depth 0.013 - 0.02 mm
Source GMD, last updated:2007/07/31
 
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
 
PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.
Compare Contact Us
XENOY? Resin
Grades Description
1102 Unreinforced PC/polyester alloy. Excellent low temperatue impact/chemical resistance to automotive fluids. 
Datasheet 
Product Data: 
Auto Data:
1760T 11% GF impact modified PBT+PC blend, excellent flow for doorhandles 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
5220U Unreinforced PBT+PC alloy. Improved retention of mechanical properties under UV. Excellent low temperature/chemical reistance. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
5720U PBT+PC, UV-Stabilizer, High Impact, Impact Modified, UV-Stabilized, 
Datasheet 
Product Data: 
Auto Data:
6370 30% Glass filled PBT blend, with low warpage characteristics and good ductility. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
CL100 General purpose grade for unpainted exterior automotive applications. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
CL101 PBT+PC, Mold Release, Heat Stabilized, High Impact,
Datasheet 
Product Data: Engineering Design Data 
Auto Data: Auto Specification
CL500U Good impact and chemical resistance. UV resistent. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
X4820 PBT+PC, Mineral Filler + Fibrillated Network, Impact Modified, Opaque, 
Datasheet 
Product Data: 
Auto Data:
X4830 PBT+PC, Mineral, Impact Modified, 
Datasheet 
Product Data: 
Auto Data:
X4850 PBT+PC, Mineral, Impact Modified, 
Datasheet 
Product Data: 
Auto Data:
X5300WX Unreinforced, opaque PBT+PC alloy. Chemical resistance and good mechanical performance. UV-stabilized. Excellent weatherability. 
Datasheet 
Product Data: 
Auto Data:
XL1562 Impact modified PBT+PC blend, outstanding chemical resistance, good UV stability and flow properties. 
Datasheet 
Product Data: Engineering Design Data 
Auto Data:
下一篇： 暫無相關信息！

轉載請注明：轉載自環球塑化資訊網 http://www.ojblg.com/news/
本文鏈接：http://www.ojblg.com/b-shabo/news270046/
免責聲明：本文"XENOY PC+PBT 5720U 化學抵抗低溫,紫外線穩定."僅代表作者個人觀點，與環球塑化網無關。環球塑化網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡。電話：400-115-2868

機械手 激光機
©2024 環球塑化網 版權所有   技術支持： 環球塑化網     訪問量：523240  管理入口

收縮

  • 電話咨詢

  • 0769-82558310
QR code
關閉
關閉
請輸入驗證碼